Video Storage SATA SAS SSD drives - JetStor SAS 864S
The JetStor 864S is a high density storage product built for huge data storage applications, data center or cloud computing. The JetStor 864S features 12Gb/s mini SAS HD host performance to increase system efficiency and performance. It features high capacity expansion, with 64 hotswappable SAS2/SATA3 drive bays in a 19-inch 4U rackmount unit, scaling to a maximum storage capacity in the terabyte range. The JetStor 864S also features optional dual controllers which provide better fault tolerance and higher reliability of system operation.
Engineered to meet stringent demands for continuous availability, JetStor SAS 864S Direct Attached Storage (DAS) RAID array features a brand-new 1.2GHz Dual Core RAID-On-Chip processor, Generation3 PCI-E internal bus, DDR3 cache, parity-assist ASIC, completely cableless backplane-based design, and storage capacities of almost 640TB in one small 4U disk enclosure. Further expansion is possible via a JBOD expansion chassis.
Low service and integration costs are assured by the JetStor's cableless design, two redundant hot-swappable power supplies with two independent power inputs, turbo cooling fans, and embedded RAID controller. An optional 2nd controller can be added to the system at a later time, if needed. Three year warranty comes standard with every Direct Attached Storage (DAS) array and covers all components.
Features & Highlights
DataBolt™ Bandwidth Optimizer for balancing faster host & slower SAS or SATA devices
Supports SSD automatic monitor clone (AMC) to extend SSD lifetime
Supports Self-Encryption Drive (SED)
Supports Clone disk
Encryption at Rest Support ISE, TCG, SED, SSD with Block Erase & Password Protect
1TB (7,200 rpm), 2TB (7,200 rpm) 3TB (7,200 rpm), 4TB (7,200 rpm), 6TB (7,200 rpm), 8TB (7,200 rpm) and 10TB (7,200 rpm) - 864S single controller only
Encryption at Rest Support ISE, TCG, SED, SSD with Block Erase and Password Protect
Exclusive Advanced Data Sentry technology (RAID 6) provides the highest level of data protection. Multiple simultaneous drive failures can be tolerated without downtime or data loss
Array Roaming feature gives administrators the ability to move a complete raid set to another system without losing RAID configuration and data on that raid set
Redundant Flash Image provides an extra layer of protection against the firmware image corruption. If the primary firmware of the RAID controller becomes corrupted, the secondary firmware image will automatically be used
Full 48-bit ATA addressing standard support allows for up to 144 petabytes capacity per drive to be utilized in the RAID array
ASIC assisted parity for lightning-fast throughput
RAID controller provides RAID 0, 0+1, 1, 3, 5, 6, 30, 50 and RAID 60, Global Hot Spare Disk, Auto Rebuild, and up to 4GB of DDR2 ECC SDRAM-based data cache
Intelligent SAS2 backplane design (uses no cables) allows "hot swapping" of disk canisters, power supplies, and fans for increased reliability, lower cost, and ease of maintenance
Built-in management Ethernet port provides easy access to the web-based GUI RAID Manager for configuration, management, and monitoring functions. E-mail event notification is built-in
Completely user configurable via the front panel
Scheduled Online Parity Consistency verification feature insures RAID set integrity