|
|
|
Adding another dimension to fault-tolerance, JetStor IDE Model 308S 2U RAID array with Advanced Data Sentry™ technology delivers reliable data protection combined with the high performance of Ultra160 SCSI host interface to support a wide variety of mission critical business applications. Engineered to meet stringent demands for continuous availability, JetStor IDE 308S RAID array features a brand-new 64-bit RISC processor for blazingly fast I/O operations, ASIC assisted parity calculation, completely cableless backplane-based design, and storage capacities exceeding 3TB in a small 2U enclosure.
Low service and integration costs are assured by the JetStor's cableless design, two redundant hot-swappable power supplies, turbo cooling fans, and embedded RAID controller. Three year warranty comes standard with every array and covers all components.
Versatility is in the heart of the JetStor IDE 308S array. Indeed, it can be used as a desktop or be rackmounted into any standard 19" rack cabinet.
JetStor IDE 308S RAID addresses many challenges present in information systems departments and delivers unparalleled storage flexibility, higher levels of data availability, management and configuration simplicity, all while securing maximum investment protection to support future growth.
|
|
|
|
|
|
Drive capacities of 60GB (7,200 rpm), 80GB (7,200 rpm), 120GB (7,200 rpm), 160GB (7,200 rpm), 200GB (7,200 rpm), 250GB (7,200 rpm), 300GB (7,200 rpm), and 400GB (7,200 rpm) are available.
Full 48-bit ATA addressing standard support.
Maximum capacity 3.2TB when using 400GB drives.
|
|
|
|
|
|
RAID Architecture
|
|
64-bit RISC 400MHz CPU with 266MHz memory bus
Up to 1600 Mbytes/sec internal bandwidth
133 MHz PCI-X interface to the backplane
|
|
Host Bus Interface
|
|
Two, 160 MB/sec. Ultra3 LVD (Low Voltage Differential) SCSI
|
|
Disk Bus Interface
|
|
Eight master Ultra ATA/133 channels;
48-bit addressing
|
|
Command Queuing
|
|
253 commands (host SCSI channels)
|
|
Cache
|
|
Up to 1GB (using one, industry-standard DDR ECC SDRAM)
|
|
Operating Systems Supported
|
|
Windows Server 2003, Windows 2000 and MSCS (Microsoft Cluster Server), Windows NT, Sun/Solaris, Linux, Tru64 Unix, HP/UX, IBM AIX, SGI IRIX, MAC OS, FreeBSD, Novell Netware, OS/2, and others to be announced
|
|
Temperature
|
|
50°F to 104°F operating, -40°F to +140°F non-operating 10°C to 40°C operating, -40°C to +60°C non-operating
|
|
Relative Humidity
|
|
10% to 85% non-condensing (operating), 5% to 90% non-condensing (non-operating)
|
|
Certifications
|
|
FCC, CE, TUV, and UL/CSA
|
|
Size/Weight
|
|
19" wide, 21" deep, 3.5" (2U) high, 31 lb. / 14 kg. (without disk drives)
|
|
I/O Connectors
|
|
Four 68-pin high density SCSI
Three 9-pin DB9 type RS-232 serial terminal port, UPS port, modem port
RJ45 Management Port / Ethernet
|
|
Power Required
|
|
110 or 220 VAC, ±20% @ 6 amps / 3 amps peak; 47 to 63 Hz autosensing
Two independent power inputs
|
|
|
|
|
|
|
|
|
|
|
|
File Server
Imaging
Disk-to-Disk Backup
Audio & Video Streaming
Digital Video Recording
|
|
|
|
|
|
Exclusive Advanced Data Sentry technology (RAID 6) provides the highest level of data protection. Multiplie simultaneous drive failures can be tolerated without downtime or data loss.
Array Roaming feature gives administrators the ability to move a complete raid set to another system without losing RAID configuration and data on that raid set.
Redundant Flash Image provides an extra layer of protection against the firmware image corruption. If the primary firmware of the RAID controller becomes corrupted, the secondary firmware image will automatically be used.
Full 48-bit ATA addressing standard support allows for up to 144 petabytes capacity per drive to be utilized in the RAID array.
ASIC assisted parity for lightning-fast throughput.
SNMP supported.
RAID controller provides RAID 0, 0+1, 1, 3, 5, and RAID 6, Global Hot Spare Disk, Auto Rebuild, and up to 1GB of DDR ECC SDRAM-based data cache.
Intelligent IDE/ATA backplane design (uses no cables) allows "hot swapping" of disk canisters, power supplies, and fans for increased reliability, lower cost, and ease of maintenance.
Built-in management ethernet port provides easy access to the web-based GUI RAID Manager for configuration, management, and monitoring functions. E-mail event notification built in.
Completely user configurable via the front panel.
Online Parity Consistency verification feature insures RAID set integrity.
|
|
|
|
|
|
AC&NC - Related Products
Sorry, No results found.
|
|
|
|
|
